Currently in the site visitors search words, there are often such questions as "peel machine line deviation". In order to eliminate the malfunctions of the users of the peeling machine, a simple analysis of the “skinning machine line deviation” problem is now conducted.

Peeling machine line deviation, for the semi-automatic coaxial debarking machine, there are two main reasons for the emergence. One is the centering module and the other is the clamped area.

The centering module determines the exact position of the stripping line. If there is a problem with the centering module and the eccentricity is caused, there may be a sidetracking phenomenon where one side of the core is wounded and the other side is stripped. The part of the clip that is caused by the clip position is mainly on the gripper jaws. There are debris on the jaws, and the jaws are in an incorrect position, which can cause stripping deviation. In addition, the loosening of the screws that fix the clips, as well as the indirectly-caused jaw problems, can occur.

For the computer debarking machine, deviation phenomenon occurs, which is mainly related to several factors such as blocking material, wire harness itself, conduit and wire feeding wheel.

Blocking material, resulting in extrusion, may lead to wire harness deviation; wire harness itself, the wire harness is not straight, the quality of the wire harness and other issues, may also be stripping deviation; the catheter is not straight, the catheter is not the center, the sending wheel loose, and so on equipment Equipment problems caused by self or later use.

In addition, since it is a peeling problem, it is naturally not separated from the tool holder part, the tool holder shifts, the blade wears, and the fixed part of the blade is loosened, etc., which can lead to deviation of the stripped line.

When there is a problem of line deviation, first determine the position of the deviation, according to the deviation of the wire, initially determine the possible cause of deviation, and then carry out the investigation, if the deviation still exists, you can change a line test machine. When the above methods cannot solve the problem of deviation, you need to contact the supplier of the peeling machine to help solve it.

Before and after use, the peeling machine must be cleaned and maintained in order to extend the service life and ensure the machining accuracy.

When the product has a problem, the product quality becomes extremely important. Once the customer can't solve it, it may need to stop and wait for after-sales service, which will cause problems in the production schedule.