The maintenance of the automatic coaxial peeling machine directly affects the working status of the machine, good maintenance can reduce the occurrence of machine failures, improve the machine intact rate, utilization rate, reduce machine wear, extend the service life of the machine, reduce the cost of machine operation and maintenance, It is the basic condition for safe production. It can be seen that strengthening the maintenance of the peeling machine is not harmful to the wire and cable processing industry. Zhou Hao Electronics, based on its own professional experience in R&D and production of corresponding equipment, summarizes the following maintenance elements:

A. Maintenance of stripping tool holder:

1. When cleaning waste after production, if you use an air gun, do not blow the machine behind the knife holder to avoid unpredictable failure.

2. If there is any unclean debris at the blade, be sure not to peel off with metal objects. Use a glue stick or a toothpick to peel off, so as not to damage the blade.

3. Open the rotating head cover regularly, and talk about the slide shaft or slide bar in the rotating head. Clean the waste oil on the roller and add proper amount of butter to ensure the lubrication of the machine, reduce the processing noise and extend the service life of the machine.

B. Maintenance of other parts:

1. Before starting the machine every time, check whether the power supply of the machine is connected properly and whether the parameters in the program are consistent with the current processing wire.

2. If the card machine is found during use, stop it immediately, turn on the power again, enter the manual mode to view the card machine and remove the hidden trouble.