|
● High speed coiler for stranded wires and multi conductor cables as well as for fiber optic cables
● Non-productive time is minimized thanks to two stations and short changeover times between the coiling stations
● High dynamic performance and full synchronization with the processing machine
● Simple operation with well arranged intuitive touch screen
● Maintenance-free machine design, fully electrically driven
The CableCoiler 200 is a stand-alone, fully synchronized high performance cable coiler for Chowho cut and strip machines. The device is best suited for all types of round cables to be coiled in high quality. Thanks to only a few configuration settings, changeover time between different jobs is minimized. This way, handling even very small batch sizes can be productive.
The coiling process is performed using two separate coiling stations. While the operator is unloading a completed coil from the first coiling station, the CableCoiler 200 proceeds to coil a cable on the second station. The cable is fed via a wire diverter and guide tube to the rotating coiling pan. After the coiling process is completed, the diverter once again switches the cable feed to the alternate coiling station.
The antislip surface on the inside of the coiling pans, in conjunction with the coiling pins, assure a controlled coiling process. After the processing machine cuts the cable, the trailing end is coiled according to the programmed parameters.
Coiling Unit |
2 |
Max Outer Diameter |
15.5 mm （0.61“） |
Workpiece Length |
From 1800 mm (70.86“) depending on the cable diameter |
Coil Diameter |
Standard inside diameter min. 110 mm – 230 mm (4.33“ – 9.05“)
outside diameter max. 310 mm (12.20“) Optional inside diameter min. 81 mm (3.18“)
outside diameter max. 152 mm (5.98“) |
Coil Height |
Max. 100 mm (3.93“) |
Coil Weight |
Max. 10 kg (22 lbs.) |
Coiling Speed |
Standard revolution speed max. 8.0 u/s (2.8 – 5.8 m/s)
Optional revolution speed max. 14.4 u/s（3.6 – 6.9 m/s） |
Cable Guide Height |
Cable Tube Height 900 - 1‘100 mm （35.43 – 43.30“） |
Interfaces |
Ethernet&CAN-Bus system (fully synchronized), Foot switch, Emergency stop link |
Options |
Lockable machine rollers, coiling pans 152/81 mm, coiling disc for fiber optic cables |
Power Supply |
220 VAC,+/- 10%, 50~60 Hz ,2000VA |
Air Supply |
5bar(75psi) |
Dimensions (L x W x H) |
775 x 752 x 1063 mm |
Weight |
110 kg |
Important Notice |
Chowho company recommends that wire samples be submitted in case where
there is doubt as to the processing capabilities of a particular machine. |
|
