I. The drawbacks of traditional semi-automatic peeling machine

Due to the limitations of domestic technology, traditional models generally have inaccurate positioning during wire stripping and inaccurate accuracy due to blade cutting angle problems. This is like the termite hole in the dam.

The working principle of the new semi-automatic peeler

According to the stripping requirements, various parameters such as gripper diameter, cable diameter, stripping length, etc. are set through the touch screen input of the control system, and then the cable is put in, and the end of the cable is touched to touch the push rod to activate the sensor. After starting the clamping unit to clamp the cable and clamping the cable, the entire stripping unit will be driven by the motor, find the initial position according to the set parameters, and start to strip the wire, and the cut wire will be stripped. In the backward movement of the unit, the cable is separated from the cable to complete a stripping operation.