Automatic peeling machine can also be a computer debarking machine, according to the function can be divided into semi-automatic peeling machine and automatic peeling machine, and according to the different functions of the corresponding working principle is not the same, today we talk about automatic peeling machine working principle.

First of all, let's understand the processing part of the automatic stripping machine: 1. Inlet, 2. Infeed, 3 in line, 4. Conduit, 5. Tool holder, 6. Outlet, 7. Outlet pressure Wheels, etc. Working principle: The wire head passes through the inlet and passes the wire to the conduit through the infeed pulley and the inline presser. Then the tool holder part will follow the input according to the input parameters. When it rotates into position, the cutter motor rotates counterclockwise, and the blade is driven by the two-link lever to cut off the outer layer of the electric wire, and the outlet wheel rotates to pull out the outer skin layer of the thread. At this time, the knife holder motor rotates clockwise to loosen the blade, and the incoming motor turns counterclockwise to cut off the outer sheath of the wire. At this time, the incoming motor rotates clockwise and pulls the outer skin layer out. After pulling out, the infeed pulley and the outlet pulley rotate counterclockwise at the same time, count and rotate according to the length of the wire input by the user. When the length meter data is in place, the rotation stops, the blade moves again, and the wire is cut off, thereby completing an automatic stripping process , so to achieve the process of automated production.

Through the process of continuous automatic stripping, the stripping, cutting, and twisting of wire rods can be satisfied by users. The automatic stripping machine can meet the production requirements of the enterprise with high precision and high speed.