|
● Intuitive color touch screen user interface
● Can strip inner conductors of jacketed cables with short break out lengths
● No mechanical adjustments required when changing wire sizes
● Very sensitive trigger sensor-works great for small, flexible wires
● Operator has clear view of the entire working area
● Barcode scanning function (option)
● Wire list processing
US-6046 strips wires ranging in size from 0.03 – 8mm² (32 – 8 AWG) and jacketed cables up to 6 mm in diameter. This innovative machine does not require any mechanical adjustments to process different wire sizes. Using the color touchscreen, the operator selects the desired wire size from the preprogrammed library and all parameters (cutting diame-ter, clamping pressure, blade way back, etc.) are automatically set. The operator edits the stripping and pull-off lengths as required and the machine is ready for operation. The US-6046 begins the stripping process when the wire end touches the trigger sensor.The wire is automatically clamped and the stripping process is performed according to the programmed values. If desired,the program can be saved to internal memory for future use.
● Full pull-off, Full pull-off and recut
● Partial pull-off,Partial pull-off and recut
● Multiple strips
● Power cords with different strip lengths
● Sensor cables with short break-out lengths
● Cutting diameter, cutting speed
● Blade way back (default values in “Basic Wire”, programmable in “Extended Wire”)
● Stripping length, pull-off length, pull-off speed
● Trimming function (for precise strip lengths)
● Cable clamping pressure
Conductor Cross Section |
0.03 ~ 8 mm²(32-8AWG) |
Max. Outer Diameter |
6 mm |
Diameter Increments |
0.01 mm |
Stripping Length |
Min.1.5 mm(with recut:Min.0.5mm)
Max.51mm,Stripping length plus pull-off length must be ≤ 51 mm |
Pull-off Length |
Max.31mm (Stripping length plus pull-off length must be ≤ 51 mm) |
Stripping Length Increments |
0.1mm |
Cycle Time |
0.40S (0.75 mm² wire, stripping length 10 mm, pull-off length 5 mm) |
Stripping Blade |
V-blades |
Raw Material Type |
PVC,PUR,rubber,Teflon® ,Tefzel® ,Kapton,etc. |
Cycle Start |
Automatic trigger sensor or Foot pedal |
Program Memory |
150 wires or cables (memory function only with “Extended Wire”)，15 wire lists / max.10 wires |
Cable Clamping |
Programmable clamping force |
Interfaces |
1 x Footpedal, 2 x USB, 1 x Ethernet |
Options |
Radius blades, Special clamping jaws |
Power Supply |
110-220 VAC ,+/- 10%, 50-60 Hz; 250VA |
Noise Level |
< 70 db (A) |
Dimension (LxWxH) |
513x186x278 mm |
Weight |
12.5 Kg |
Important Note |
Chowho company recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine |
|
