阿里巴巴商铺
Product display
4dhcpmingchen
Your location  Home -> Products  ->  Semiautomatic Coaxial Cable stripping Machines  ->  Stripping Machine for Semi-Rigid Coaxial Cables SR-2380
[Next] 

  • Detail

  • Application Area/Concept

  • Function

  • Technical Specifications

  • PDF document

● SR-2380
● Stripping Machine for Semi-Rigid Coaxial Cables
　SR-2380 is designed for stripping conventional semi-rigid coaxial cable from 0.86 mm (0.034“) up to 4.5 mm (0.177“) O. D. Thanks to the predefined cable types and the intuitive data input, cable programs can be created and stored within a very short time.
　Function
　The operator inserts the cable and starts the stripping process by pressing the footpedal. As soon as the cable is processed, the grippers open and the cable can be removed by the operator.

● Stripping of inner conductor
● Stripping and pointing of inner conductor (angle 60° or 90°)
● Stripping of outer conductor
● Stripping of inner and outer conductor
● Stripping of inner and outer conductor and pointing of inner conductor
● Stripping and pointing of inner conductor on cable with soldered connector already in place
Cable Diameter Max.4.5 mm (0.177”)；Min.0.86mm(0.034“)
Stripping Length Max.30mm (1.18”)
Increments Length：0.01 mm（0.00039“）steps
Diameter：0.01 mm（0.00039“）steps
Stripping Blades For turning and removing:2pcs
For turning：2pcs.(1 each）
For pointing: 1 set (4 pcs.)
Cycle Rate >3s,(depending upon cable type and programming)
Program Capacity 100 cables
Interfaces 2x USB,Footpedal, Ethernet (on request)
Noise Level < 70 db (A)
Power Supply 100/115VAC，230/240 VAC , 50-60 Hz; 300VA
Air Pressure 6 bar/0.6Mpa/87psi
Air Consumption per Cycle 7-30 l at 6 bar (87 psi), (depending upon cable type and programming)
Dimensions (L x W x H) 655x297x317 mm（25.8x11.7x12.5”)
Weight 19.5 Kg
Important Notic Chowho company recommends that wire samples be submitted in case where there is doubt as to the processing capabilities of a particular machine.